Simplicity Stallion Series, Руководство оператора

Страница: 18 / 42

14
Regular
Maintenance
MAINTENANCE SCHEDULE & PROCEDURES
The following schedule should be followed for normal care of your rider and mower. You will need to keep a record of
your operating time.
See Before Before Every Every Every Spring
SAFETY ITEMS Page First Use Each Use 5 Hours 25 Hours 100 Hours & Fall
Check Safety Interlock System 7
● ●
Check Rider Brakes 23
● ●
Check Mower Blade Stopping Time 25
● ●
See Before Before Every Every Every Spring
NORMAL CARE ITEMS Page First Use Each Use 5 Hours 25 Hours 100 Hours & Fall
Check Rider/Mower for loose hardware —
● ●
Check Engine Oil Level 15*
● ● ● ●
Check Engine Air Filter 15*
●
***
●
Change Engine Oil & Filter ** 15* ***
●
Every 50 Hours ***
●
Check/Adjust PTO Clutch 25 ****
●
Lubricate Rider & Mower 16 ***
●
Check Tire Pressure 14
●
***
●
Check Hydraulic Fluid 15
●
***
●
Check Fuel Filter 15
●
Clean Battery & Cables 17
●
Clean & Sharpen Mower Blades 18
●
Inspect Spark Plug 15*
●
Tire Pressure
Front 25 psi (1,72 Bar)
Rear 15 psi (1,03 Bar) Figure 10. Checking Tire Pressure
CHECK TIRE PRESSURES
Tire pressure should be checked periodically, and main-
tained at the levels shown in the chart. Note that these
pressures may differ slightly from the “Max Inflation”
stamped on the side-wall of the tires. The pressures
shown provide proper traction, improve cut quality, and
extend tire life.
* See the engine manufacturer's owner's manual.
** Change original engine oil after first 5 hours of operation.
*** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
**** Service after the first 25 hours, then after every 100 hours.