Simplicity Broadmoor series, Руководство оператора

Страница: 24 / 64

24
Maintenance
46” and 52” Mowers - Loosen the outside nut ( A ,
Figure 23). Turn the eccentric nut ( B ) to raise or lower
the front of the mower. When the mower is level, hold
the eccentric nut while tightening the outside nut.
9. Re-check the blade measurement then tighten the front
nut against the bracket to secure.
A B
Figure 23
Front-To-Back Leveling
6. Arrange the blades so they face front-to-back.
7. Measure the distance from the ground to the front tip of
the center blade, and from the ground to rear tips of left-
hand and right-hand blades.
Front tip of the center blade should be 1/4” (6 mm)
higher than rear tips of left-hand and right-hand blades.
If not, proceed with Steps 8 - 9.
8. 44” and 50” Mowers - To raise front of mower deck,
loosen front nut ( A , Figure 22) and turn rear nut ( B )
against bracket. To lower front of mower deck, loosen
rear nut and the bracket will move backwards to
lengthen rod.
B A
Figure 22
Not
for
Reproduction