background image

Thank you

for purchasing this quality-built product. We’re pleased that you’ve

placed your confidence in the Simplicity and Snapper brand. When operated and
maintained according to the instructions in this manual, your product will provide
many years of dependable service.

This manual contains 

safety information to make you aware of the

hazards and risks associated with this machine and how to avoid them. This
machine is designed and intended to be used and maintained according to the
manual for finish cutting of established lawns and is not intended for any other
purpose. It is important that you read and understand these instructions
thoroughly before attempting to start or operate this equipment.

Briggs & Stratton Yard Power Products Group
Copyright © 2007 Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved.

The Simplicity logo is a trademark of Briggs & Stratton
Corporation Milwaukee, WI, USA.

Contact Information:

Simplicity Manufacturing, Inc.
P.O. Box 997
500 N. Spring St.
Port Washington, WI 53074-0997
www.simplicitymfg.com

ENGINE REFERENCE DATA

Unit Model Number

PRODUCT   REFERENCE   DATA

Unit SERIAL Number

Dealer Name

Date Purchased

Engine Make

Engine Model

Mower Deck Model Number

Mower Deck SERIAL Number

Engine Type/Spec.

Engine Code/Serial Number

DATE PURCHASED

See Page 8 for the location of Identification Numbers

The Snapper logo is a trademark of Briggs & Stratton
Corporation Milwaukee, WI, USA.

Contact Information:

Snapper Products
535 Macon St.
McDonough, GA 30253
www.snapper.com

WARNING

Engine exhaust from this product contains
chemicals known, in certain quantities, to
cause cancer, birth defects, or other
reproductive harm.

Содержание 5900660














































Отзывы: