manualshive.com logo in svg

Simplicity 5900506, Руководство оператора

Поделиться
Скачать
Simplicity 5900506 Скачать руководство пользователя страница 40

Not for 

Reproduction

38

www.Simplicitymfg.com

Specifications

ENGINE:

24 Gross HP* Briggs & Stratton

Make

 

Briggs & Stratton

Model

 44M777-0133-G1

Displacement

 

34.75 Cu. in (570 cc)

Electrical System

 

12 Volt Starter, 16 amp. Alternator, 

 

Battery: 340 CCA

Oil Capacity

 

2.0 US qt. (1.9 L) w/ Filter

27 Gross HP* Briggs & Stratton

Make

 

Briggs & Stratton

Model

 44Q777-0146-G1

Displacement

 

44.2 Cu. in (724 cc)

Electrical System

 

12 Volt Starter, 16 amp. Alternator, 

 

Battery: 340 CCA

Oil Capacity

 

2.0 US qt. (1.9 L) w/ Filter

*Power Ratings:

 The gross power rating for individual gasoline 

engine models is labeled in accordance with SAE (Society 
of Automotive Engineers) code J1940 Small Engine Power 
& Torque Rating Procedure, and is rated in accordance with 
SAE J1995.  Torque values are derived at 2600 RPM for those 
engines with “rpm” called out on the label and 3060 RPM for all 
others; horsepower values are derived at 3600 RPM.  The gross 
power curves can be viewed at www.BRIGGSandSTRATTON.
COM.  Net power values are taken with exhaust and air cleaner 
installed whereas gross power values are collected without these 
attachments.  Actual gross engine power will be higher than net 
engine power and is affected by, among other things, ambient 
operating conditions and engine-to-engine variability.  Given the 
wide array of products on which engines are placed, the gasoline 
engine may not develop the rated gross power when used in 
a given piece of power equipment.  This difference is due to a 
variety of factors including, but not limited to, the variety of engine 
components (air cleaner, exhaust, charging, cooling, carburetor, fuel 
pump, etc.), application limitations, ambient operating conditions 
(temperature, humidity, altitude), and engine-to-engine variability.  
Due to manufacturing and capacity limitations, Briggs & Stratton 
may substitute an engine of higher rated power for this engine.

CHASSIS:

Fuel Tank: 

 

Capacity: 5 Gallons (18,9 L)

Rear Wheels

 

Tire Size: 20 x 10.00 -10

 

Inflation Pressure: 15 psi (1,03 bar)

Front Wheels

 

Tire Size: 11 x 4.00 - 5

 

Inflation Pressure: 25 psi (1,72 bar)

TRANSMISSIONS:

HydroGear ZL-KMEF-3L7C-1KLX (LH)
HydroGear ZL-GMEF-3L7B-1KLX (RH)
Type

 ZT3100

Hydraulic Fluid

 

SAE 20W-50 motor oil

Speeds

 

Forward: 0-7 MPH (0-11,27 km/h)

@ 3400 rpm

 

Reverse: 0-5 MPH (0-8.05 km/h)

DIMENSIONS:

Overall Length:

 

71” (180 cm)

Overall Width 

49” (125 cm)

Height:

 

43” (109 cm)

Weight (apx.): 

770 lbs. (349 kg)

NOTE: Specifications are correct at time of printing and are subject to change without notice.

Specifications

Содержание 5900506













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды