background image

MAINTENANCE

16

Check Mower Blade Stopping Time 

Mower blades and mower drive belt should come to a com-
plete stop within five seconds after the electric PTO switch
is turned off. 

1. With tractor in neutral, PTO disengaged and operator in

seat, start the engine.

2. Look over the left-hand footrest at the mower drive belt.

Engage the PTO and wait several seconds. Disengage
the PTO and check the amount of time it takes for the
mower drive belt to stop.

3. If mower drive belt does not stop within five seconds,

see an authorized dealer.

Check Tire  Pressure

Tire pressure should be checked periodically, and maintained
at the levels shown in the chart. Note that these pressures may
differ slightly from the “Max Inflation” stamped on the side-wall
of the tires. The pressures shown provide proper traction, im-
prove cut quality, and extend tire life.

Size

PSI

bar

15 x 6.0-6

12-14

0,82-0,96 bar

20 x 8.0-8

10

0,68 bar

Maintenance Chart

TRACTOR AND MOWER

Every 8 Hours or Daily

Check safety interlock system

Clean debris off tractor and mower deck

Clean debris from engine compartment

Every 25 Hours or Annually *

Check mower blade stopping time

Check tractor and mower for loose hardware

Check tire pressure

Every 50 Hours or Annually *

Check tractor brakes

Clean battery and cables

See Dealer Annually to

Lubricate tractor and mower

Check mower blades **

*  Whichever comes first
** Check blades more often in regions with sandy soils or

high dust conditions.

ENGINE

First 5 Hours

Change engine oil - see engine manual

Every 8 Hours or Daily

Check engine oil level - see engine manual

Every 25 Hours or Annually *

Clean engine air filter and pre-cleaner **

Every 50 Hours or Annually *

Change engine oil

Replace oil filter

Annually

Replace air filter

Replace pre-cleaner

See Dealer Annually to

Inspect muffler and spark arrester

Replace spark plug

Replace fuel filter

Clean engine air cooling system

*   Whichever comes first
** Clean more often in dusty conditions or when airborne

debris is present.

www.simplicitymfg.com

Not 

for  

Reproduction

Содержание 2690810

























Отзывы: