ASSEMBLY
5/10
STEP 1
Determining Measurements
NOTE:
Do not mount the mirror directly onto the vanity surface or back splash.
A minimum gap of 10 mm must be left on the top of the vanity.
• Lay the Mirror (1) face down on a soft no scratch surface.
• Measure the distance from the top of the Mirror to the top of the slot
of the Mirror bracket. Record this measurement
(Measurement A)
.
• Mark the vertical centerline of the Mirror.
• Determine the height of the mirror noting where the top edge of the
Mirror will be. Record this measurement
(Measurement B)
.
