background image

3. QUICK EASY SETUP

10

2

3

2

JAN 31 12:00

1

Unlock the key and remove the top 
case.

3

Replace the cover and lock.

2

Remove the PROTECTION PAD.

4

Plug the AC cord into the AC outlet 
and insert a card.

CA

UTIO

N

CA

UTIO

N

(Print example)

Protection PAD

AC outlet

AC cord

Card

4. OPTIONAL FUNCTIONS

11

  Following optional functions are available by adding an optional board.
External Time Signal for Bell, Built-in Buzzer and Slave Clock.

External Time Signal and Built-in Buzzer

External  time  signal  and  Built-in  buzzer  shall  be  controlled  by  Time  table  program  and  their 
duration settings.
Refer  to  the  "18.SETTING  THE  TIME  TABLE  PROGRAM",  and  the  "19.SETTING  THE 
EXTERNAL TIME SIGNAL / BUILT-IN BUZZER".

Connection Specifications for External time signal contact
• Contact output: dry contact
• Contact capacity: 5A / 30V (Resistive)

The Slave Clock

The Slave Clock is a function to synchronize the time of Time Recorder and the master clock. This 
function operates by choosing Slave Clock setup.

Refer to the "20.SETTING THE SLAVE CLOCK".

Input signal Specifications.
• 30-second reversal.

Since the 30-second signal (-V side) is not received, the difference from the master clock is 30 

seconds or more, and the time is not modified correctly.

• 60-second reversal.

Since the odd-numbered signal (-V side) is not received, the difference from the master clock is 

one minute or more, and the time is not modified correctly.

• 59-minute impulse ( 2-wire )

From the 59th minute through the 49th minute the pulse is transmitted with line AB positive with 

respect to PC.

From  the  50th  minute  to  the  59th  minute  the  pulse  is  transmitted  with  line AB  negative  with 

respect to PC.

During the 59th minute, the continuous pulse of 20 times is transmitted with line AB negative 

with respect to PC.

As  this  method  monitors  from  5  minutes  before  several  preset  hours  to  input  0-minute  signal, 
more than 5 minutes of tolerance for a master clock can not compensate time correctly. 

Pulse Specification   Input sensitivity
Pulse width             

  0.1 second or more

Voltage                    

  

6 - 32V

4

ENGLISH

Содержание EP40





























































Отзывы: