TrueAlert ES Operation Advantage (Cont’d)
Reducing Installation and Testing Time.
With
separate controls on the same two-wire SLC, installation
time and expense for both retrofit and new construction can
be significantly reduced. When Class B wiring is used,
wiring can be “T” tapped
, allowing more savings in
distance, wire, conduit (size and utilization), and overall
installation efficiency. Use of Self-Test and Magnet Test
features improves installation efficiency. TrueAlert device
reports conveniently identify information about each
connected appliance.
TrueAlert ES Diagnostics
Test Features.
When
IDNAC SLCs are in
diagnostic
mode,
Self-Test
and
Magnet Test
features provide individual
appliance testing. With the
Self-Test
feature,
appliance
operation can be confirmed without leaving the control panel
.
Additionally, each appliance’s LED can be selected to pulse
when it receives a supervision poll during normal operation.
Self-Test Details.
Selecting Self-Test Mode from the control
panel allows on-board sensors, depending on the device type,
to detect its own strobe and/or horn output and then report their
status to the control panel.
TrueAlert ES Diagnostics (Continued)
Self-Test Details (Continued).
Operation is by selected
VNAC appliance groups and is either automatic (all briefly
simultaneously activated) or individually activated by applying
a magnet. (Refer to data sheet S4100-0100 for more Self-Test
information.)
Silent Appliance Magnet Test.
In this test mode, in
response to application of a magnet, the appliance LED
pulses sequentially to conveniently indicate the appliance’s
address.
Operational Appliance Magnet Test.
In this test mode,
after the address is indicated by pulsing the appliance LED,
the strobe will briefly flash to indicate proper operation.
TrueStart Instrument Two (TSIT).
The 2nd generation
of the Simplex TrueStart Test Instrument adds testing of
IDNAC SLC wiring and TrueAlert ES appliances to its
ability to test IDCs, NACs, and IDNet communications
before
connection to the control panel
. Please contact your
local Simplex representative for additional information.
TrueAlert Addressable Wiring Isolator
Isolator Model
4905-9929
is available for remote
mounting on TrueAlert addressable circuits to isolate short
circuited wiring from functioning wiring. (See data sheet
S4905-0001.)
TrueAlert ES Wall Mount Addressable Strobes
TrueAlert ES addressable VO (strobe) appliances include cover and matching mounting plate except as noted;
Dimensions with Cover = 5
⅛
” H x 5” W x 1 ½” D (130 mm x 127 mm x 38 mm)
Model*
Cover Color
Wording
Lens Color
Model*
Cover Color
Wording
Lens Color
49VO-WRF(-BA) Red
FIRE
Clear
49VO-WRQ Red
FEU
Clear
49VO-WWF(-BA) White
49VO-WWQ
White
49VO-WRA(-BA) Red
ALERT
49VO-WRS(-BA) Red
Blank
49VO-WWA(-BA) White
49VO-WWS(-BA) White
49VO-APPLW
Select cover and mounting plate separately
Separate Mounting Plate
Model
Color
Note
49MP-AVVOWR Red
Mounting Plate
is required
when ordering model 49VO-APPLW
49MP-AVVOWW White
Separate Covers
(Required when ordering model 49VO-APPLW)
Model*
Color
Wording
Model*
Color
Wording
49VOC-WRFIRE Red
FIRE
49VOC-WRFEU Red
FEU
49VOC-WWFIRE White
49VOC-WWFEU
White
49VOC-WRALT Red
ALERT
49VOC-WRBLNG Red
FEU/FIRE
49VOC-WWALT White
49VOC-WWBLNG White
49VOC-WRS Red
Blank 49VOC-WWS White
Blank
* Note:
(-BA) indicates model is available either with or without the -BA suffix. Model numbers ending in -BA, APPLW models, and
separate mounting plates are assembled in the USA.
Mounting Adapters and Wire Guard
Model
Color
Description
Dimensions
4905-9937 Red
Surface Mount Adapter Skirt
5
⅜
” H x 5 ¼” W x 1
⅝
” D (136 mm x 133 mm x 41 mm)
Total depth with strobe = 4
⅜
” (111 mm)
4905-9940 White
4905-9931
Red Adapter Plate for mounting to Simplex 2975-9145 Box
(typically for retrofit, mount vertical or horizontal)
8
5
⁄
16
” x 5 ¾” x 0.060” Thick (211 mm x 146 mm x 1.5 mm)
2975-9145 Red Mounting Box, requires 4905-9931 Adapter Plate
7
⅞
" x 5
⅛
" x 2 ¾" D (200 mm x 130 mm x 70 mm)
4905-9961
Red wire guard with mounting plate, compatible with semi-
flush or surface mount boxes
6
1
⁄
16
” H x 6
1
⁄
16
” W x 3
⅛
” D (154 mm x 154 mm x 79 mm)
2
S49VO-0001-3 8/2014
Product Selection
