MOUNTING THE BRACKET
In the Package you find a Bracket com-
posed by three elements: 2 vertical
ones (Black Colour) and one horizontal
(white color). Connect them as shown
in the picture with the 6 screws.
FIXING THE BRACKET ON THE
DESIRED POSITION ON THE WALL
Find the best barycentric position with-
in the room to be sanitized, place the
lower side of thebracket at a 160 cen-
timeters hight and make sure that in
the range of 110 centimeters there will
be a power socket available to plug in
the H-Fog device. The bracket has to be
fixed with 6 Screws / and correspond-
ing wall fixing expanders units supplied
by drilling the holes on the wall with a
Drill BIT with 6mm diameter.
ATTENTION: make sure that the
wall structure is suitable to hold the
weight of the device and it doesnt
have any metallic material inside
HANGING H-FOG BACK PANEL
ON THE BRACKET
ATTENTION: this operation has to be
done in two people: one guiding the
H-Fog Device to get into the HOOKS
of the Braket, the other one keep-
ing lift the H-Fog device for security
reasons and to avoid dangerous fall
down of the product. DON’T proceed
with this STEP alone.
Step 1
: Hang H-Fog unit to the Bracket
and fix it with the two Screws provid-
ed. Using the holes shown by the red
arrows.
INSTALLATION
ATTENTION: Installation of the Device has to be performed by Authorized Installers.
Step 2
: identify the holes in the back
part of H-FOG to be hanged on the
Hooks of the BRACKET and Insert
H-Fog into them
4
5
6
4
