OPENING H-FOG
To install H-Fog on the wall it is nec-
essary to Open it and separate the
BODY/FRONT PANEL from the BACK
PANEL. Insert the metallic tool in the
small flat SLOT, push on the left side
and pull the Drawer out.
REMOVING THE DRAWER
Once the Drawer is pulled till the end,
move it upwords for few millimeters
and pull it by rotating it towards you.
UNLOCKING THE BODY/FRONT
PANEL
Inside H-Fog the BODY/FRONT PAN-
EL is fixed to the BACK PANEL through
two Plastic Hooks (one on the left, one
on the right). Pull them towards you
and put them in the Drawer. Now it is
possible to remove the BODY/GLASS
front panel by rotating it upside.
WARNING: BEFORE REMOVING THE
BODY/FRONT PANEL MAKE SURE THAT
H-FOG IS NOT CONNECTED TO THE
POWER SOCKET.
INSTALLATION
ATTENTION: Installation of the Device has to be performed by Authorized Installers.
1
2
3
3