SL-881 6G Handheld HDMI/MHL Audio and Video Generator/Analyzer
User Guide
Simplay-UG-02001-E
© 2016-2017 Simplay Labs, LLC.,
27
All rights reserved. CONFIDENTIAL
HDR Debug Test is one of the selected tests in the Sink Tests. When HDR Debug Test in Sink Tests is running, HDR
Palette window pops up (
).
HDR Debug Test is available only in the Sink Tests of the EDDC Compliance Test. This HDR Debug Test feature is
available since SL-881 AVG software version 1.16 and hardware version 2.10015008. To download the software,
refer to
Downloading the SL-881 AVG Software
Figure 4.6. HDR Palette Window
•
Use SDR, HDR, or SMPTE radio button to select HDR infoFrame type.
•
Use Min R, Min G, and Min B buttons to set Primary points to reflect minimum Red, Green, and Blue
coloremetry.
•
Use BT.601, BT.709, and BT.2020 buttons to set Primary points to reflect BT.601, BT.709, and BT.2020
coloremetry.
•
Fill in Primary 1, Primary 2, Primary 3, and White Point fields to set Primary and White points with arbitrary
values. The primary range is from 0 to 1.0.
•
Drag the circle points in the coordinate axis to set Primary and White points with arbitrary values.
•
Use slider bar Max, Min, MaxCLL, and MaxFALL to adjust luma parameters for HDR infoFrame.
•
Use Apply Changes button to control AVG platform to send new HDR infoFrame based on current selections.
•
Click Press Result PASS or Result FAIL button to end the test. Select which button that depends
on customers’
expection of the sink device in this test.