SL-881 6G Handheld HDMI/MHL Audio and Video Generator/Analyzer
User Guide
Simplay-UG-02001-E
© 2016-2017 Simplay Labs, LLC.,
17
All rights reserved. CONFIDENTIAL
3.
Optional SL-881 AVG Software
You must have purchased the SL-881 AVG software (p/n SL-881-SWUPG) from you distributor or Simplay Labs before
you can complete the installation steps outlined below and obtain the license key to activate the features (SCDC, DDC,
and EDID Editor)
This section provides details on downloading and installing the optional SL-881 AVG software to your test computer.
Note:
Upon installation and licensing, control of the optional features resides with the
application installed on your test computer.
Overall, the optional SL-881 AVG software installation and licensing requires these procedures:
1.
Download the optional software from the website to your test computer.
2.
Install the software driver and the software. We recommend you installing the driver first.
3.
Purchase and activate the software license. The license must be purchased.
Downloading the SL-881 AVG Software
The optional SL-881 AVG software can be downloaded from the Simplay website to your test computer. To download
the software, see the Simplay Labs site, at:
https://www.simplaylabs.com/Support/
3.1.1.
Contents of the Software Package
Download the firmware, software and driver (
):. Save*.zip to your test computer. Unzip the file.
Figure 3.1. Inside the Software Package
•
The SL881_AVG_driver_installation folder contains driver installation files. Refer to
Section 3.3
details.
•
The SL881 AVG PC Software contains software installation files. Refer to
Section 3.4
below for more details.
•
The SL-881 Firmware contains the binary file. Refer to
Appendix A
for more details.
System Requirements
Before installing the software, you need to confirm the system environment of your test computer.
•
A PC or laptop computer with Microsoft Windows 7 or Windows 8, 32 bit or 64 bit Operating System.
•
Minimum 4 GB, optimum 8 GB RAM.
•
500 GB hard drive.