SIMPAL-T2 GSM Temperature Alerter USER MANUAL
1. Purchase a GSM SIM card (mobile phone card) from
GSM network service provider and install it in the
alerter. This SIM card number is referred as SimPal-T2
number on this brochure.
2. The user needs to activate the Caller ID Presentation
function of SIM card, and deactivate PIN code of the
SIM. Contact with GSM network service provider for
support.
3. Change the original password at the beginning use. Be
sure to keep the password and SIM card number
secret. Do not disclose this information to anyone
other than the authorized users.
For your safety
•
Before using this alerter, make sure that the mobile phones device
allow using in the area, otherwise, do not put this alerter into
operation.
•
This alerter was designed for indoor use. Don
’
t use it in wet,
chemically aggressive or dusty environment.
•
Do not open the case unless maintenance needed.
•
Do not keep shaking or fall down this alerter, otherwise it can be
damaged.
•
This alerter is a wireless signal transmission device. Keep it away
from electronic equipment likely to interfere with the wireless signals,
in order to avoid signals interference.
•
Switch off this alerter and mobile phone when entering areas
marked "Explosive", "Might explode" etc.
•
Do not cast this alerter in a fire, as this may cause explosion.