11 Accessories
11.1 Thumb-turns
The following special thumb-turns are available as accessories:
Outer thumb-turn in a TN4 design
Outer thumb-turn, 42 mm in diameter with recessed grips
Inside thumb-turn, 36 mm in diameter for a .TS cylinder
Outer thumb-turn, shortened
Brass thumb-turn, matt (inside and outer thumb-turn)
These thumb-turns can replace the original locking cylinder thumb-turns at
any time. See Installation instructions or Battery replacement for thumb-
turn installation.
11.2 Core extraction protection adapter (Z4.KA.SET)
This adapter is compatible with all SKG/VdS cylinders manufactured up to
2010 and all .FD cylinders.
There is a mechanical extension for core extraction protection fittings as
the profile cylinder profile is not cut out of these fittings. The extension is 8
mm long and can be retrofitted at any time.
11.3 Core extraction protection extension for SKG/VdS cylinders
(Z4.KA.SET2)
This adapter is compatible with all SKG/VdS cylinders manufactured in
2011 and onwards.
There is a mechanical extension for core extraction protection fittings as
the profile cylinder profile is not cut out of these fittings. The extension is 8
mm long and can be retrofitted at any time.
11.4 Core extraction protection extension for SKG/VdS cylinders
(Z4.KA.SET2.IT)
This adapter is compatible with all SKG/VdS cylinders manufactured in
2011 and onwards.
There is a mechanical extension for core extraction protection fittings as
the profile cylinder profile is not cut out of these fittings. The extension
length is 16 mm for special Italian escutcheons and can be retrofitted at
any time.
Digital Locking Cylinder 3061
(Manual)
11. Accessories
45 / 54
