Simons Voss Technologies SmartRelay SREL Series, Руководство пользователя

Страница: 18 / 38

Functions con-
nection 1
F1
Input ext. Trigger input (3-24 V DC
ext. contact must be isolated)
Functions con-
nection 2
F2 Omron data / Wiegand DO
Functions con-
nection 3
F3
Omron CLK / Wiegand D1
LED / buzzer (external)
Card reader line link
SimonsVoss bus SVB
SimonsVoss bus – card reader line
link
Open drain outputs up to max. 24 V DC / 0.5 A. Earth connection to power
supply's negative terminal. If a CLS (card loading signal) is featured, the
SREL2 must be configured for CLS in its properties.
5.4 Notes on SREL connection
To use a SmartRelay as a card reader in a third-party access control or
time-and-attendance system, the hardware (cabling and signal emitter)
and data formats must match those of the card reader precisely. This is the
only way that the third-party system will be able to understand and
evaluate data from transponders.
First of all, the SmartRelay reads the transponder data. If the transponder
is authorised for use in the SmartRelay, these data are transmitted to the
third-party system via the serial interface. You will receive detailed
specifications for individual data formats from SimonsVoss Technologies
GmbH.
SREL1+2 (Manual)
5. Connections
18 / 38