© Munters AB, 2013 P/N: 110538
Ag/MIS/IGB-229310/15 Rev. 1.5
Relay Expansion Box for Platinum Pro and
Platinum Touch
(P/N: 900-07-XXXXX)
(P/N: 900-14-XXXXX)
Страница 1: ... Munters AB 2013 P N 110538 Ag MIS IGB 229310 15 Rev 1 5 Relay Expansion Box for Platinum Pro and Platinum Touch P N 900 07 XXXXX P N 900 14 XXXXX ...
Страница 2: ... 485 card to the Platinum Expansion RS 485 card Figure 1 Platinum Pro to Platinum Expansion Wiring Figure 2 Platinum Pro to Platinum 30 Expansion Wiring 2 To ensure proper termination place a A terminator on the EXP jumpers on the Platinum Pro communication card if the Platinum Pro is located at the end of a daisy chain ...
Страница 3: ...s Define the Controller s RS 485 card dip switches as Main Define the Expansion units dip switches as required Table 1 Dip Switch Settings SWO Position SW1 Position Main Off Off Extension 1 Off On Extension 2 On Off Extension 3 On On Figure 3 Platinum Pro Address Dip Switches 4 Connect the relays as required Refer to the Platinum Pro Touch Installation manual for details 5 Attach the power wiring ...
Страница 4: ...13 P N 110538 Ag MIS IGB 229310 15 Rev 1 5 Figure 4 Expansion 50 Power Wiring Figure 5 Expansion 30 Power Wiring Connect the power supply wires to the appropriate ports 1 230 VAC 50 60 Hz USA L1 L2 ROW line neutral 2 ...
