Simons Voss Technologies SmartLocker AX SmartIntego Скачать руководство пользователя страница 51

Страница: 51 / 53

14 Help and other information

Information material/documents

You will find detailed information on operation and configuration and other
documents on the website:

https://www.smartintego.com/int/home/infocenter/documentation

Declarations of conformity

You will find declarations of conformity and other certificates on the
website:

https://www.simons-voss.com/en/certificates.html

Information on disposal



Do not dispose the device (SV-LL.*; SI-LL.*) in the household waste.
Dispose of it at a collection point for electronic waste as per European
Directive 2012/19/EU.



Recycle defective or used batteries in line with European Directive
2006/66/EC.



Observe local regulations on separate disposal of batteries.



Take the packaging to an environmentally responsible recycling point.

Technical support

Our technical support will be happy to help you (landline, costs depend on
provider):

+49 (0) 89 / 99 228 333

You may prefer to send us an email.

[email protected]

FAQs

You will find information and help in the FAQ section:

https://faq.simons-voss.com/otrs/public.pl

SmartLocker AX SmartIntego

(Manual)

14. Help and other information

51 / 53

Содержание SmartLocker AX SmartIntego






















































Результаты поиска

Содержание SmartLocker AX SmartIntego

Отзывы:

Похожие инструкции для SmartLocker AX SmartIntego

Бренды по названию

Популярные бренды

Simons Voss Technologies SmartLocker AX SmartIntego, Руководство пользователя

Результаты поиска

Содержание SmartLocker AX SmartIntego

Отзывы:

Похожие инструкции для SmartLocker AX SmartIntego

Бренды по названию

Популярные бренды