Simons Voss Technologies SmartHandle AX Скачать руководство пользователя страница 19

Страница: 19 / 178

6 Installation

You can programme the SmartHandle AX while it is still in the packaging
(except MP) and then install it.

You will also find information on installing the SmartHandle AX in the
accompanying quick guide.

6.1 Installation instructions



The batteries are already fitted.



Do not touch electronics/components; do not allow them to come into
contact with oil, paint, moisture, alkali or acids.



Keep away from sources of interference, such as power supply units.



You must not strike the product while installing the cylinder.



Attach plan to the door. Do not install while bent or tensioned.



Use the supplied drilling template.



If required, fit the supplied dummy cylinder to comply with approval
requirements for FH variants.



Only undo the indicated screws.

6.2 Variant A0 (vertical installation)

6.2.1 Contents of packaging

SmartHandle AX

(Manual)

6. Installation

19 / 178

Содержание SmartHandle AX



















































































































































































Результаты поиска

Содержание SmartHandle AX

Отзывы:

Похожие инструкции для SmartHandle AX

Бренды по названию

Популярные бренды

Simons Voss Technologies SmartHandle AX, Руководство пользователя

Результаты поиска

Содержание SmartHandle AX

Отзывы:

Похожие инструкции для SmartHandle AX

Бренды по названию

Популярные бренды