Operating Instructions for the Palm LDB Version 1.40
5
Version: June 2004
4.1
Carry out Emergency Opening
Touch the
Open door
button. Then enter the locking system password (for
LSM: the user password) on the keyboard shown in the display. Pay attention
to upper and lower case letters – the password is case-sensitive. Then touch
OK
.
4.2
Testing the PalmCD2
Touch the
ConfigDevice
button. Then place the Palm (m5xx, Tungsten W and
Tungsten T3) on the PalmCD2.
Touch
Test
to check the PalmCD2 programming device. If it does not
respond, you can reset it with the button with that name. Then check your
programming device again. The PalmCD2 should report software version 9.3
or later.
PalmCD2:
If the PalmCD2 does not respond, you should check the battery
status. If necessary, remove the PalmCD2 from the Palm briefly
and then put it on again.
