Digital Half Cylinder
Page 5
3.0 Additional Functions
3.1
OMRON
All product versions can be operated in OMRON mode. You will find a detailed
description in the Smart Relay manual.
3.2
Extending the Coupling Time
The default time for the coupling of the cylinder is approximately 5 seconds. You can
use the software to extend this time to approximately 10 seconds. This shortens the
lifetime of the battery, however.
3.3
Logging Unauthorised Access Attempts
For cylinder version 10.2 and later and in combination with the LDB Version
1.40, it is possible to log unauthorised access attempts, as well as authorised
accesses. This includes both access attempts without authorisation and
access attempts outside the specified time zone. In this connection, however,
only transponders from the locking system are logged, which means that the
transponder must have the same locking system ID (SID).
3.4
No Acoustic Programmer Acknowledge
When programming over the network, it can be advantageous to deactivate the
acoustic programmer acknowledge. You can do that with this function.
4.0 Battery Warnings
4.1
Half Cylinder
Warning level 1 for main battery
If the main battery of the half cylinder goes empty, eight short signal tones, coming
quickly one after another, sound after you operate the transponder and before the
cylinder couples. You must replace both batteries now.
Warning level 2 for backup battery (SW Version 10.0 & SW Version 10.1)
In addition to the main battery warning, an additional sixteen short signal tones, com-
ing quickly one after another, sound for the backup battery warning. The cylinder
does not couple until after the signals. From now on, the backup battery is active. You
must replace both batteries as soon as possible.
Warning level 2 for backup battery (SW Version 10.2 and later)
In addition to the main battery warning, the signal tones of the backup battery warning
now sound for approximately 30 seconds. The cylinder does not couple until after the
signals. From now on, the backup battery is active. You must replace both batteries
as soon as possible.
