6
3.
If oil is low, add oil up to point of overf
l
owing
f
i
ller
neck.
4.
Reinstall dipstick or oil f
i
ll plug and tighten
securely.
Change Oil
1.
Clean area around oil f
i
ll cap/dipstick and
drain plug.
2.
Remove drain plug and oil f
i
ll cap/dipstick.
Drain oil
completely.
5.
3.
Reinstall drain plug. Torque to 18-25N·m.
4.
Fill crankcase with new oil, up to point of
overf
l
owing f
i
ler neck.
Reinstall oil f
i
ll cap/dipstick and tighten
securely.
6.
Dispose of used oil in accordance with local
ordinances.
Fuel Recommendations
WARNING
Explosive Fuel can cause f
i
res and
severe burns.
Do not f
i
ll fuel tank while engine is hot
or running.
Gasoline is extremely f
l
ammable and
its vapors can explode if ignited. Store gasoline only in
approved containers, in well ventilated, unoccupied
buildings, away from sparks or f
r
ames. Spilled fuel
could ignite if it comes in contact with hot parts or
sparks from ignition. Never use gasoline as a cleaning
agent.
NOTE: E15, E20 and E85 are NOT approved
and
should NOT be used; effects of old, stale or
contaminated fuel are not warrantable.
Fuel must meet these requirements:
● Clean, fresh, unleaded gasoline.
● Octane rating of 87 (R+M)/2 or higher.
● Research Octane Number (RON) 90 octane
minimum.
● Gasoline up to 10% ethyl alcohol, 90%unleaded is
acceptable.
● Methyl Tertiary Butyl Ether (MTBE) and
unleaded
gasoline blend (max 15% MTBE by
volume) are
approved.
● Do not add oil to gasoline.
● Do not overf
i
ll fuel tank.
● Do not use gasoline older than 30 days.
Add Fuel
WARNING
Explosive Fuel can cause f
i
res and
severe burns.
Do not f
i
ll fuel tank while engine is hot
or running.
Gasoline is extremely f
l
ammable and
its vapors can explode if ignited. Store gasoline only in
approved containers, in well ventilated, unoccupied
buildings, away from sparks or f
r
ames. Spilled fuel
could ignite if it comes in contact with hot parts or
sparks from ignition. Never use gasoline as a cleaning
agent.
Ensure engine is cool.
1.
Clean area around fuel cap.
2.
Remove fuel cap. Fill to base of f
i
ller neck.
Do not
overf
i
ll fuel tank. Leave room for fuel
to expand.
3.
Reinstall fuel cap and tighten securely.
Change oil while engine is warm.
