SDP660 – USER MANUAL
TNM-U-E-0114
Jun 15 (Iss. 1.4)
Page 28
BASIC OPERATIONS
5.3
W
ELCOME
S
CREEN
Within the FPP there is a ‘Welcome Text’ field, which enables a welcome message to be displayed
on the screen when the radio is switched on. If the Welcome Text has been defined, the radio will
display the welcome message and radio ID for two seconds while the radio initialises.
Note.
Use of a Welcome Text message will increases the power-on time by 2 seconds.
Figure 9. Welcome Screen (example).
5.4
L
OCKING AND
U
NLOCKING THE
K
EYPAD
When the keypad is not in use it can be locked to prevent accidental keypad operation. This is
known as the KeyLock facility.
Figure 10. Default Screen with Keys Locked.
If the keypad
is ‘Locked’, all the keys except PTT, Alarm, Reset and Unlock function are disabled.
When the keypad is locked, the radio will display the key icon on the icon bar and ‘UnLock’ above
the F1 key.
To unlock the keypad, either of the following methods can be used:
1
By key combination.
Press the F1 key followed by the ‘*’ key within 2 seconds. When the F1 key is pressed the
radio will display ‘Now Press *’. After the star key is pressed, the original F1 label will be
redisplayed.
2
By using the function key.