Simmons DA2100 Series Скачать руководство пользователя страница 10

DA2100 SERIES 

ADVANCED ELECTRONIC DRUM AMPLIFIERS

13

Smart Stereo

A matching pair of DA2100 series amplifiers can be connected via a standard microphone cable, for unified 

volume and tone control from the first master amplifier, with optimal distribution of mono and stereo audio 

signals between both amplifiers, for immersive high-fidelity stereo sound

Floor/Pole Switch

Configures amplifier for consistent frequency response whether used on the floor, or on a speaker pole 

Rear Panel Inputs (1/2/3)

Left/mono and right 1/4-inch TRS balanced/unbalanced compatible audio line inputs

Bluetooth Audio Input

Bluetooth 5.0 Stereo Audio Input, with On/Pair and Off buttons plus LED

Front Panel Aux Input

1/8-inch mini TRS unbalanced input

Link In Jack

XLR ba4dBv audio input

Link Out Jack

XLR ba4dBv audio output

Direct Out Jack

XLR ba4dBv audio output

Power LED

Front panel white LED indicates power on

Clip LED

Front panel red LED indicates power amp clipping

Power Cable

Detachable IEC 3-connector USA standard

Power Input

Switchable: 110-120V/60 Hz or 220-240V/50Hz

Cabinet

Polypropylene

Grille

1.2mm steel 

Speaker Pole Socket

35mm (1.35-inch) standard socket for speaker pole mounting (speaker pole not included)

Suspension Points

DA2100 Series Units Are Not Designed For Suspension

DA2108

DA2110

DA2112

Power Consumption

100W

400W

Power Output

100 Watts RMS 

400 Watts Peak

350 Watts RMS 

2000 Watts Peak

Headphone Output

3.5mm Stereo Jack 

Silences speakers when connected

3.5mm Stereo Jack 

Dedicated volume control knob

Input 3 Routing

Not included

To facilitate click track, 

metronome and backing track 

use in performance, input 3 can 

be routed to  

phones only,  

phones and speakers only, or 

phones, speakers and direct out 

EQ Knobs

Lows: -/+12dB @ 65Hz 

Highs: -/+12dB @ 10KHz

Lows: +/-12dB @ 65Hz 

Mids: -/+12dB @ 2.5KHz 

Highs: -/+12dB @ 10KHz

Lows: +/-12dB @ 65Hz 

Low Mids: -/+12dB @ 350Hz 

High Mids: -/+12dB @ 2.5KHz 

Highs: -/+12dB @ 10KHz

Volume/Level Knobs

Input 1 Level knob 

Bluetooth/Aux Level knob

Input 1 Level knob 

Input 2 Level knob 

Bluetooth/Aux Level knob

Input 1 Level knob 

Input 2 Level knob 

Input 3 Level knob 

Bluetooth/Aux Level knob 

Master Volume knob 

Headphone Volume knob

Speaker Drivers

8-inch Low Frequency driver 

1-inch Compression driver

10-inch Low Frequency driver 

1-inch Compression driver

12-inch Low Frequency driver 

1-inch Compression driver

Frequency Response

65-20K Hz

55Hz-20KHz

40Hz-20KHz

Max SPL@1M

118dB

120dB

126dB

Product Dimensions

17.25”W x 10.25”H x 10.1”D 

20”W x 11.8”H x 11.45”D

 

24.1”W x 14.2”H x 14.2”D

Packaging Size

20.1”W x 13.4”H x 13.4”D

22.85”W x 15”H x 15”D

 

28.1”W x 18.1”D x 18.1”D

Net Weight

15.5 pounds

20 pounds

35 pounds

Gross Weight

19 pounds

24 pounds

45 pounds

SPECIFICATIONS

Содержание DA2100 Series














Отзывы: