1. General
Thank you for purchasing the SimLab Dash SD43X. On the following pages you will find a description
on what is in the box, how to install the dash. And about which software is supported.
SimLab Dash SD43-X is designed around the popular USBD480 LCD screen. This 4,3” TFT screen
supports a resolution of 480x272 pixels and is provided with a high speed USB connection with a
maximum refresh rate of 90 FPS. Exact FPS is determined by the chosen software.
2. In the Box
In the box you will find the following items:
* Dash SD43-X
* Micro USB cable
* 2x M5 bolts
* 2x M6 bolts (Fanatec mounting option)
* Adapter plate Fanatec (DD, CSW, Elite)
* Adapter plate OSW/Simucube/VRS
3. Mounting the Dash
There are two mounting plates supplied in the package to mount the dash on the most used steering
wheels. These plates can also be used to mount the dash in your own way.
Fanatec
The Fanatec mounting plate is designed to mount the dash on top of the Fanatec bases (DD, CSW,
Elite) while the display on the podium wheel base DD1 and DD2 still can be viewed.
The various slot holes can be used to slightly change the mounting height based on your own
preference.
Mounting
Bolt the adapter plate to the dash using the two supplied M5 bolts
Bolt the dash with the mounted adapter plate to the two mounting points on the Fanatec podium
base with the two supplied M6 bolts
Plug the supplied USB cable into the connector on the back of the dash and plug it in to a free USB
port on your computer. Continue to the driver and software section of this manual.
