SAFETY INSTRUCTIONS
This device has been produced in accordance with safety regulations. Operation in violation
of the rules may cause harm to people and the device.
Read the user manual carefully before operating the device. You can find important
information about assembly, safety, operation and maintenance in the user manual. This way
you can both protect yourself and prevent the device from getting damaged.
If the Supply Cord is damaged, it must be replaced by the manufacturer or its service agency
or equally qualified personnel in order to prevent a dangerous situation. The heating tube
available on the device must be checked for cracks and deformation. If the glass tubes are
damaged, the heater must not be used and the authorized service must be contacted.
It must be checked whether the main power line is 220-240V AC, 50-60 Hz and connected to
the circuit breaker. Network safety must be checked. The circuit breaker must be 16 amperes.
The device must be certainly used with grounded receptacle and the grounded receptacle must
be away from the heater area and hot surface. Furthermore, looseness and damage check must
be performed on the receptacle. Loose receptacles cause harm to the device and installation.
The device must not be connected to the same electric cable or circuit breaker as other devices.
The power cable must not be left on or near the hot body of the device.
If the device is not to be used for a long time, moved to another place, cleaned or calibrated,
the plug of the device must be disconnected. It must be made sure that the device has cooled
down.
Do not use the device in places very close to any bathroom, shower or swimming pool.
3