MAINTENANCE AND CLEANING
Maintenance
Careful and regular maintenance in line with the recommendations given in this manual is
crucial in order to operate the device efficiently for a long time.
-
The pollution of the reflector (reflecting mirror) and quartz glass tubes must be
checked at least once a month by the user. If they are dirty, the cleaning and
maintenance instruction must be performed.
-
The said checks must be conducted more frequently depending on the dust amount in
the operating environment.
-
The power cable and plug must be checked while cleaning the device. If the power
line or plug has been deformed, they must be taken to the authorized service.
-
Reflector, wire, and body deformation must be visually checked while cleaning the
device. If there is any deformation, the authorized service must be called for necessary
actions.
-
It is recommended to replace the reflector every two years in order for the device to
run more efficiently. The reflector must be replaced by the authorized service.
Keeping the reflector clean ensures maximum heating efficiency of the device.
Cleaning
Attention! The device will work more effectively and last longer if regular and careful
cleaning is performed by the user.
-
The device must be turned off and the power cable of the device must be disconnected
and left to cool down before cleaning.
-
If the reflector (reflecting mirror) and quartz glass tube are dirty, they must be cleaned
externally with dry air without removing the protective screen wire if possible.
-
The outer surface of the device must be cleaned with soft cotton cloth or soft brush.
-
Do not use corrosive materials of solvents for cleaning the heater. Such substances
may damage the plastic parts.
-
Do not clean the device with steam cleaners.
12