Simex SUR-94, Руководство пользователя

Страница: 47 / 60

User manual - METER SUR-94
Register Write Range Register description
Yes 2CCh÷1800h
State of passive current output, expressed in 1/256 mA units – it
means that high byte express integer part, and low byte fractional
part of desired output current.
Yes 0h ÷ 1600h
State of active voltage output, expressed in 1/512 V units – it means
that high byte express integer part, and low byte fractional part of
desired output voltage.
06h No -999 ÷ 9999 Peak (drop) value (no decimal point)
08h No 0 ÷ 50 Temperature inside device housing expressed by 1°C
10h Yes 0 ÷ 20
“
tyPE
” parameter in “
InPt
” menu (nominal input range):
0 - 0-20 mA range; 1 - 4-20 mA range; 2 - 0-10 V range;
3
- 2-10 V range;
4
- 0-5 V range;
5
- 1-5 V range;
6 - 0-60 mV range; 7 - 0-75 mV range; 8 - 0-100 mV range;
9 - 0-150 mV range; 10 - Pt-100; 11 - Pt-500; 12 - Pt-1000
13 - thermocouple input K; 14 - thermocouple input S;
15 - thermocouple input J; 16 - thermocouple input T;
17 - thermocouple input N; 18 - thermocouple input R;
19 - thermocouple input B; 20 - thermocouple input E;
11h Yes 0 ÷ 3
“ CHAr ” parameter in “ InPt ” menu (characteristic type)
0 - linear ; 1 - square; 2 - square root; 3 - user defined
12h Yes 0 ÷ 255
“
FiLt
” parameter in “
InPt
” menu (time constant in seconds)
13h Yes 0 ÷ 3
“ Pnt ”parameter in “ InPt ” menu (the copy of 03h register, decimal
point position): 0 - “ 0 ”; 1 - “ 0.0 ”; 2 - “ 0.00 ”; 3 - “ 0.000 ”
14h Yes -999 ÷ 9999 “ Lo C ” parameter in “ InPt ” menu, no decimal point included
15h Yes -999 ÷ 9999 “ Hi C
” parameter in “
InPt
” menu, no decimal point included
16h Yes 0 ÷ 999 “ Lo r ” parameter in “ InPt ” menu, in 0.1%
17h Yes 0 ÷ 199 “ Hi r ” parameter in “ InPt ” menu, in 0.1%
18h Yes -99 ÷ 99
“
toFS
” parameter in “
InPt
” menu (shift of measurement scale),
expressed by 0.1°C (for RTD input) or by 1.0°C (for TC input)
19h Yes 0 ÷ 2
“ Conn ” parameter in “ InPt ” menu (RTD input connection method):
0
- “
4 in
”;
1
- “
3 in
”;
2
- “
2 in
”
20h 2 Yes 0 ÷ 199 Device address
21h No 20D8h Device identification code (ID)
22h 3 Yes 0 ÷ 7
“bAud”
parameter in
“rS”
menu (baud rate);
0
- 1200 baud;
1
- 2400 baud;
2
- 4800 baud;
3
- 9600 baud;
4
- 19200 baud;
5
- 38400 baud;
6
- 57600 baud;
7
- 115200 baud
23h 4 Yes 0 ÷ 1
“mbAc” parameter in “rS” menu (permission to write registers via
RS-485 interface); 0 - write denied ; 1 - write allowed
24h Yes see descr.
Parameters of “ SECU ” menu (binary format (0 - „ oFF ”, 1 - „ on ”):
bit 0 - “ A r1 ” parameter; bit 1 - “ A r2 ” parameter
bit 2 - “ A r3 ” parameter; bit 3 - “ A r4 ” parameter
47