Simex STI-638, Руководство пользователя

Страница: 48 / 52

User manual - RATEMETER STI-638
Parameter Description Default value User's value
Desc.
page
t on Turn on delay of relay 0.0 (sec.) 27
t oFF Turn off delay of relay 0.0 (sec.) 27
unit Unit of “t on” , “toFF” parameters of relay „SEC” 27
ALArmS Reaction for critical situation of relay „oFF” 27
Activation of acoustic signal (“bEEP” menu)
AL Activation of acoustic signal by critical situation oFF 27
r1 Activation of acoustic signal by relay R1 oFF 27
r2 Activation of acoustic signal by relay R2 oFF 27
r3 Activation of acoustic signal by relay R3 oFF 27
r4 Activation of acoustic signal by relay R4 oFF 27
Configuration of measurement input (”inPUt” menu)
FrEq Maximum permitted frequency 300 (Hz) 28
PULSEn Input pulse divider 1 28
PrEc Measurement result displaying precision „0.0” 28
unit Rotational speed unit „min” 29
F or P Kind of value visible on the display „FrEq” 29
mUL multiplier 1 29
div divider 1 29
ZEro t Maximum delay between successive revolutions 1.0 (sec.) 29
mEAS t Measurement window width 0.5 (sec.) 29
Configuration of displayed value filtering (”FiLtEr” menu)
vALUE Filtering ratio 0 29
droP Measurement value change switching off the filter 20.0 (%) 30
Active current output configuration (“OutPUt” menu)
OUtmod
Active current output mode
„0-20” (mA)
30
OUt LO Display value for 0 mA or 4 mA current output 0.0 30
OUt HI Display value for 20 mA current output 100.0 30
Lo r
Extension of the bottom of the nominal output
range
5.0 (%)
31
Hi r Extension of the top of the nominal output range 5.0 (%) 31
AL Current output value on critical exception 22.1 (mA) 31
Passive current output configuration (“OutPUt” menu)
OUtmod Passive current output mode
„4-20” (mA)
30
OUt LO Display value for 4 mA current output 0.0 30
48