Sime SOLIDA 5, Руководство пользователя

Страница: 7 / 40

7
“THERMOMAT RT-C” Regulator
The “Thermomat” regulator is equipped with
a thermosetting resin knob of an adjustment
field from 30 to 100 °C (fig. 7).
Screw the regulator on the 3/4” opening of
the anterior head and orientate the red index
on the upper part.
The lever with the chainlet should be intro-
duced in the regulator holder after having
assembled the instrument holder board and
after having removed the plastic lock.
If the joint is taken out, which fixes the lever
with the chainlet, take care in assembling
it again in the same position. After having
placed the knob at 60°C, block the lever with
the chainlet in a slightly inclined position
downwards, so that the chainlet will be in
axis with the air gate damper.
For the adjustment of the “Thermomat”,
which essentially consists in the determina-
tion of the chainlet length, proceed in the
following way:
– Place the knob at 60°C.
– Switch on the boiler with opened air gate
damper.
– When the water temperature of 60° C is
reached in the boiler, fix the chainlet in
such a way on the lever of the air gate
damper, in order to obtain an opening of
about 1 mm.
– Now the regulator is calibrated and it is
possible to choose the desired operating
temperature by rotating the knob.
“REGULUS RT2” Regulator
The adjustment field is included between 30
and 90°C (fig. 8). Follow the same instruc-
tions of the “Thermomat” regulator for the
assembly and the activation.
HYDRAULIC CONNECTION DIAGRAM 1.2.8
Open expansion tank system
“REGULUS RT2” Regulator
Fig. 7
“THERMOMAT RT-C” Regulator
LE GEN D
VE Open expansion tank
VS System safety valve 3 BAR - 1/2”
VM Mixing valve
VR Check valve
PI System pump
IR Heating system
Fig. 8
Fig. 9