Sime MURELLE HT 25 GPL Скачать руководство пользователя

Страница: 4 / 76

RESTRICTIONS

IT IS FORBIDDEN

– To allow children under the age of 8 to

use the appliance. The appliance can

be used by children no younger than

8 years old, by people with physical

or cognitive disabilities, and by people

lacking experience or the necessary

knowledge, provided that they are su-

pervised or have been instructed on

how to use the appliance safely and

that they understand the risks associ-

ated with it.

– To allow children to play with the ap-

pliance.

– To allow unsupervised children to per-

form user maintenance and cleaning.

– Do not use electrical devices or appli-

ances such as switches, electrical ap-

pliances etc if you can smell fuel. If this

should happen:

open the doors and windows to air the

room;

close the gas isolation device;

promptly call for professional assis-

tance.

– Do not touch the appliance with bare

feet or with any wet part of the body.

– Do not carry out any technical inter-

vention or cleaning operation before

having disconnected the appliance

from the mains power by setting the

main switch to "OFF", and closing the

gas supply.

– Do not modify the safety or adjustment

devices without authorization and in-

structions from the manufacturer.

IT IS FORBIDDEN

– Do not block the condensate drain (if

present).

– Do not pull, detach or twist the electri-

cal cables coming out of the appliance

even if the appliance is disconnected

from the mains power supply.

– Do not expose the boiler to atmos-

pheric agents. These boilers can also

be installed in partially covered are-

as, as per EN 15502, with a maximum

ambient temperature of 60 °C and a

minimum ambient temperature of - 5

°C. It is recommended that the boiler

is installed below weathered roofs, on

the balcony or in a protected niche, to

protect it from exposure to weathering

agents (rain, hail and snow). The boiler

is equipped as standard with an anti-

freeze function.

– Do not block or reduce the size of the

ventilation openings of the room where

the appliance is installed, if present.

– Remove the mains power and gas sup-

ply from the appliance if the external

temperature could fall below ZERO

(risk of freezing).

– Do not leave containers with flamma-

ble substances in the room where the

appliance is installed.

– Do not leave packaging material

around since it could be dangerous.

Therefore dispose of it as prescribed

by legislation in force.

Содержание MURELLE HT 25 GPL













































































Результаты поиска

Содержание MURELLE HT 25 GPL

Отзывы:

Похожие инструкции для MURELLE HT 25 GPL

Бренды по названию

Популярные бренды

Sime MURELLE HT 25 GPL, Инструкция для пользователя, по установке и обслуживанию

Результаты поиска

Содержание MURELLE HT 25 GPL

Отзывы:

Похожие инструкции для MURELLE HT 25 GPL

Бренды по названию

Популярные бренды