42
EN
– Once all the displays/modifications have been completed,
press the button
Esc
to go back to the
“main screen”
.
Gi 18 Set 2014
Zona 10:30
Menu
Modo
Off
TECHNICAL ASSISTANCE CENTRE Menu
WARNING
It is useful to enter the TECHNICAL ASSISTANCE
CENTRE references which can then be displayed in
the
“Display Menu”
and are suggested to the user if
there is a serious fault in the boiler.
To enter the TECHNICAL ASSISTANCE CENTRE references:
– follow the procedure described in section 4.2.3 on page 40
up to the section “go into the submenu”.
–
Rotate the encoder
to select the required
submenu
“Technical Assistance Centre”
submenu.
TECHNICAL
Esc
Back
Zone heating
[...]
Hot water
[...]
Boiler parameters
[...]
Reset alarm history
[...]
Factory total reset
[...]
TECHNICAL
Esc
Back
Customer service
[...]
– Or press the button
Confirm
to go into the
“Parameter set-
tings”
area for the boiler
Boiler parameters
Esc
Back
Parameter Index: 1
Parameter Value: 0
1--------49
– where
“Parameter index”
refers to the parameter table in the
manual of the installed boiler (eg. 1=tS 0.1 or 1=PAR 01).
– Rotate the encoder
to scroll through the list of pa-
rameters and check the value
– If the value of the selected parameter is to be modified:
– Press the encoder
click
to go into the value modification
area
Boiler parameters
Esc
Back
Parameter Index: 1
Parameter Value: 0
1--------49
– Press the encoder
to set the new value
– Press the encoder
click
to confirm the modification and
move on to another parameter.
