Sime afaq PIROEMME, Руководство пользователя

Страница: 10 / 44

contains the fan. For the assembly of
the details proceed as indicated in the
succession of stages below.
4.5.1 Fan assembly
Take out the fan from the packaging
and proceed as follows:
- Position the gasket and mount the
fan by blocking it with the brass
screws supplied (fig. 12).
- In PIROEMME 6-7 , after mounting
the fan unit, install the protective
frame and block it with the four
screws supplied (fig. 12).
4.5.2 Bypass device assembly
(fig. 6)
The bypass device is a direct passage
between the wood storage area and
the chimney. It is connected with a
contr ol r od. The f lue gases
accumulated in the storage area are
thus collected and sent directly to the
chimney.
The bypass device basically allows the
flue gases to be discharged towards
the chimney without coming out from
the top door during switch-on and
loading operations.
To mount the bypass device, proceed
as follows:
- Inser t t he block (1) in t he
designated housing by securing it
with the two hex socket screws
supplied.
- Mount the lever (2) with the screws
and nuts supplied.
- Insert the control rod (3), block it at
the lever (2) with the locking ring.
We recommend making sure that
the spring and washer have been
10
1
2
3
4
Fig. 6