Sime 8115020, Инструкция для пользователя, по установке и обслуживанию

Страница: 63 / 84

63
EN
6.12 Smoke outlet and combustion air inlet
Vera HE
boilers must be equipped with appropriate smoke flue ducts and combustion air inlet ducts. These ducts are considered an
integral part of the boiler and are provided by
Sime
as an accessory kit, to be ordered separately from the appliance on the basis of the
type permitted and the system requirements.
Permitted outlets
max 0,5 m
max 0,5 m
B23P
B53P
C33
C53
C43
B33P
C83
C43
C13
C13
C33
C93
B23P-B53P
Combustion air inlet into the atmosphere and smoke out-
let to open air.
B33P
Combustion air inlet into the atmosphere and smoke out-
let into single flue.
NOTE:
opening for combustion air (6 cm
2
x kW).
C13
Concentric wall smoke outlet The pipes can start from the
boiler but the outlets must be concentric or close together
(no more than 50 cm) to be subject to similar wind condi-
tions.
C33
Concentric roof smoke outlet The pipes can start from the
boiler but the outlets must be concentric or close together
(no more than 50 cm) to be subject to similar wind condi-
tions.
C43
Outlet and inlet in shared or separate flue pipes but sub-
jected to similar wind conditions.
C63
Same type as C43 but with outlet and inlet made from
pipes which are sold and certified separately.
C53
Separate wall or roof inlet and outlet in different pressure
areas.
NOTE: the inlet and outlet must never be positioned on op-
posing walls.
C83
Outlet in single or shared flue or with inlet on wall.
C93
Separate outlet and inlet in shared flue pipe.
P:
smoke outlet system designed to operate with positive
pressure.
Fig. 23
m
WARNINGS
– The smoke flue and the connection to the flue pipe must be in compliance with the national and local standards and legis-
lation in force in the country where the appliance will be used.
– The use of rigid ducts which are resistant to temperature, condensate, mechanical stress and are air-tight is compulsory.
– Outlet ducts which are not isolated are a risk of danger.