5200992 Rev F
36
PROBLEM
CAUSE
SOLUTION
Process material
fouling static bar
ion emitters.
Remove process
material from static
bar.
Clean Bar indicator
illuminated.
Dirt build-up on
ion emitters or
conductive
contamination on
face of bar.
Clean ion emitters
and static bar. See
Maintenance section
for details.
Poor electrical
connections.
Check connections of
modular cable at
power supply and
web monitor.
W eb Monitor Remote
Communication Status
indicator NOT flickering.
Incorrectly wired
modular cable
(check against
cable illustrations
in Installation
section).
Replace modular
cable.
W eb Monitor display
scrambled.
Display
microprocessor
“locked up”.
Turn power switch on
end of web monitor
case off, then back
on, to reset display
microprocessor.
Power not on at
communication
module.
Turn on Power switch
on end of
communication
module case.
Poor electrical
connections.
Check connections of
modular cable at
power supply and
web monitor.
Communications Module
not working.
Incorrectly wired
modular cable
(check against
cable illustrations
in Installation
section).
Replace modular
cable.
