1
5101153 Rev D
I-VSE 5000
1. NOTES AND CAUTIONS
IMPORTANT –
Simco-Ion Industrial Static Control recommends that these instructions be
read completely before installation or operation of this power unit. Failure to do so could
result in personal injury and/or damage to the unit or equipment.
Review the following safety precautions to maintain safety and prevent damage to the
instrument or equipment connected to it. The safety features of this instrument may be
ineffective if the equipment is not operated in the manner stated in this manual. Refer all
maintenance procedures to qualified personnel.
NOTE -
If any damage has occurred during shipment, notify the local carrier at once. A
report should also be forwarded to Simco-Ion, 2257 North Penn Road, Hatfield PA 19440.
Terms and Symbols
The following terms and symbols appear in this manual:
NOTE –
Statements identified with a NOTE indicate precautions necessary to avoid
potential equipment failure.
CAUTION -
Statements identified with a CAUTION indicate potential safety
hazards.
NOTE -
This equipment must be correctly installed and maintained. Adhere to the
following notes for safe installation and operation.
1.
Read instruction manual before installing or operating equipment.
2.
Only qualified service personnel are to perform installation and repairs.
3.
All equipment must be properly grounded, including the machine frame to which the
equipment is mounted.
4.
Do not operate device in excess of specifications.
NOTE –
Do not insert objects into the intake or outlet of the ionizing blower.
CAUTION –
Electrical Shock Hazard – Always disconnect power supply before
connecting or disconnecting static neutralizing equipment. Avoid touching static
neutralizing point when power supply is energized.
CAUTION –
Fire Hazard – Do not install or operate equipment in close proximity to
any flammable solvents or in explosive atmospheres.
CAUTION –
Personal Protective Devices Recommended – Always wear safety
glasses or goggles when operating ioninzing blower. Also wear hearing protection
if the ioninzing blower is operated more than 1½ hours per day.
