E
N
SD
I0
1
In
cl
in
o
m
e
te
r
6
5.2 Through another module to the splitter
Connecting the inclinometer to another module to the splitter.
INDIRECT WIRING – THROUGH ANOTHER MODULE TO THE SPLITTER
6.
After connecting the module
After connecting the module, your monitor will automatically recognize it and
configure two new inclinometer devices, which you can see in the list of
inclinometers MENU > DEVICES > INCLINOMETERS
On the main screen, after scrolling down (using arrow-down button), past the
first screen, you will reach a new »Inclinometers« screen, which shows you the
current readings of your inclinometer module. Please note that at this step, due
to the lack of calibration, it is expected that the angle values are incorrect. The
process of calibrating your sensor is explained in the next section.