29. With the system in Cleaning mode the water
pump is the only component in operation to
circulate the cleaning solution in the entire water
system.
30. Let the unit remain in the cleaning mode for
about 20 minutes
31. Push again the
RESET BUTTON
for a while
POWER
OPER.
BIN
FULL
ALARM
ALARM
HI
PRESS.
RE-SET
……till
WASH YELLOW LED
starts to
blink three
times and repeat
.
POWER
OPER.
BIN
FULL
ALARM
ALARM
HI
PRESS.
RE-SET
32. The machine is now in the
automatic rinsing
mode
that means to keep in operation the water
pump and the water drain valve for 40 seconds
to drain out all remained water
…then both are de-energized while water inlet valve
remains energized-open
33. Once water reservoir is filled up by water, the
water pump starts up again for 3 minutes
circulating, into the water system, the new fresh
water.
NOTE: sequences # 32 and # 33 are repeated 7
times so to be sure that no more trace of de-
scaling solution can remain into the water
system.
34. After the 7th rinsing cycle the machine stops the
operation with the
blinking (slow)
of the
WASH
YELLOW LED
.
POWER
OPER.
BIN
FULL
ALARM
ALARM
HI
PRESS.
RE-SET
35. Drop approx. 5 ml of sanitizer (Amuchina)
directly into the water reservoir
36. Push again the
RESET BUTTON
for a while
O
O
N
N
O
O
N
N
O
O
N
N
