select the correct one.
•
Switch on your 3D glasses. Refer to the instructions supplied with the glasses
to ensure correct operation.
•
The projector will automatically detect the 3D signal and you will be prompted
to wear your glasses via the OSD.
To Watch 3D Content via Satellite, Cable and Games Console
•
Switch on the M.120 and all other relevant products such as Satellite receiver
and AV receiver and ensure the correct inputs have been selected.
•
Select the appropriate 3D channel.
•
If the projector displays two distorted images side by side or one on top of
each other, select the 3D menu by pressing II on the remote control.
•
Select 3D mode via the OSD (this will expand the menu). Select the correct
version of the 3D format using the up/down/left/right keys.
•
Switch on your 3D glasses. Refer to the instructions supplied with the glasses
to ensure correct operation.
Important:
All 3D technologies currently available today filter out a large amount of
light. Therefore it is perfectly normal for the 3D image to be noticeably dimmer when
compared to the picture in 2D mode. Adjust the 3D picture settings accordingly for 3D
viewing.
Note:
The use of Low Energy Compact Fluorescent Lighting can interfere with the IR
transmission data for the 3D glasses resulting in the loss of 3D. We recommend that
all lighting is switched off whilst using the projector especially for 3D
3D Glasses
Follow the simple instructions below to operate your 3D glasses.
Turning ON your glasses
Shortly press button once (see “3D Glasses” on page 13). You will see the red LED
indicator change from off to bright, and then turn off again. You are now in SIM2
Cinema mode and the glasses and the projector are synced. If, for any reason, the
glasses behave differently, reset them (see below).
If glasses cannot find 3D RF emitter within few seconds, LED will ramp from bright to
off and glasses will automatically shut down. If glasses find the RF emitter they will
automatically connect to it, indicating by lit LED for 1 second.
Turning OFF Your Glasses
Shortly press button once (see “3D Glasses” on page 13). You will see the red LED
indicator change from bright to off. Glasses will shut down.
Note:
For charging the battery to “3D Glasses” on page 18.
3D Menu
To view 3D content additional adjustments are required. With 3D content playing,
press II on the remote to access the OSD 3D menu.
4
Operation
M.120
User Guide
21
