StreamCaster MIMO Radio User Manual
4/30/19
10017C000
Silvus Technologies Confidential
Page
152
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
* Consult the dealer or an experienced radio/TV technician for help.
In order to maintain compliance with FCC regulations, shielded cables must be used with this
equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications
made to the equipment without the approval of the manufacturer could void the user’s authority
to operate the equipment.
To satisfy RF exposure requirements, this device and its antennas must operate with a
separation distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter.
14.
Notes Regarding CE Mark (SC4200-206-EB and
SC4400-206-SBST models only)
The following Silvus Technologies models are declared to conform to CE Mark requirements:
Silvus P/N:
SC4240-206-EB, SC4480-206-SBST
Relevant standards:
ETSI EN 302 064 V2.1.1 (2016-09), Wireless Video Links, Harmonized Standard
ETSI EN 301 489-1 V2.2.0 (2017-03), EMC, Common Technical Requirements
ETSI EN 301 489-28 V1.1.1 (2004-09), EMC, Specific conditions for wireless digital video links
EN 60950-1, Information Technology Equipment, Safety
Frequency range:
2025-2110 MHz
Maximum RF power: 500 mW per channel, up to a maximum EIRP of 1.6 watts for the SC4240-206-
EB, and 3.2 watts for the SC4480-206-SBST
Antenna:
2.15dBi Omni Antennas (AOV2D230515)
