StreamCaster MIMO Radio User Manual
4/30/19
10017C000
Silvus Technologies Confidential
Page
116
<Air Time %><Data Rate (Mbps)><RSSI Ch1> <RSSI Ch2> <RSSI Ch3> <RSSI Ch4>
Notes:
-
The ‘Air Time’ specifies the percentage of time the radio is transmitting.
-
Data rate shown is actual user data rate in Mbps.
-
MCS or NSS of N/A signifies that no data has been sent to that radio yet.
o
Frequency:
RF center frequency of the node.
o
Bandwidth:
RF bandwidth of the node.
o
Noise Level:
Received noise level of the node.
o
Interference:
Approximate in-band interference level.
o
TX Power:
Total target transmit power of node.
o
TX Power (Actual):
Actual transmit power of node. This value may differ from the target
transmit due to temperature variation or inability to transmit a clean signal with the
selected MCS at the target power.
o
Fragmentation Threshold:
Chosen fragmentation threshold.
o
Virtual IP:
Secondary IP address of node (0 if none set).
o
MCS Mode:
Transmit MCS of node.
o
Variable GI mode:
The variable GI mode setting for this node.
