Silvus StreamCaster 4000 Series Скачать руководство пользователя страница 128 | Manualshive

Страница: 128 / 155

background image

StreamCaster 4000 series MIMO Radio User Manual

9/2/20

10017C000

Silvus Technologies Confidential

Page

127

7.

Wired Backbone

Wired  Backbone  extends  the  StreamCaster  mesh  functionality  over LAN  (Ethernet)  and  WAN  (Internet)
links.  This  feature  is  transparent  to  end-users  -  they  do  not  have  to  re-configure  their  devices  in  any
manner  to use this  feature.

The StreamCaster routing protocol will automatically detect and route data on wired links to preserve air
bandwidth.

7.1

LAN Backbone

The LAN backbone feature allows more than one radio to be connected to a LAN.

7.1.1

Implementation

One of these radios must be configured as a “gateway” radio. This radio then begins listening
promiscuously on its ethernet interface to “register” all devices on the LAN as being connected to the

gateway radio. At the same time, it auto-detects other non-gateway radios connected to the LAN and

establishes “wired” links to them. StreamScape Web GUI will show LAN links with the link label of “wired”

and turn the link color black in order to differentiate from wireless links.

The  non-gateway  radios  do  not  register  any  devices,  they  merely  act as  relays.  The  gateway radio  will
forward  traffic originating  from  the  LAN, destined  for a device  attached  to a wireless  radio, to the  non-
gateway radio that is closest to the destination.  Similarly,  any traffic originating from a device attached to
a remote wireless  radio, destined  to a device  on the LAN will be forwarded  by non-gateway radios to the
gateway radio. The gateway radio will then  send it to the device.

Currently  we  support  data rates  of up  to 80  Mbps  on  the  LAN  without  encryption.  Since  all  LAN traffic
goes via the gateway radio, this is the upper  limit of all traffic that can enter or go out of the LAN from/to
devices  connected  to wireless  radios. Of course,  this  limit  does  not affect the  throughput  between  two
devices connected  directly  to the LAN backbone.

7.1.2

Use Case

Consider  the following scenario. A business  wants to do video monitoring  of its grounds. High  speed  LAN
hookups  are  available  only  in  the  HQ  building.  They  want  to  use  the  StreamCaster  radios  on  towers  to
provide  complete  coverage  of the  grounds.  All  video  feeds  are  sent  back  and  displayed  at  the  HQ.  To

«
...
126
127
128
129
130
...
»

Содержание StreamCaster 4000 Series




























































































































































Отзывы:

Нет отзывов

Похожие инструкции для StreamCaster 4000 Series

Бренд: Teac Страницы: 17

Zlinx Xtreme ZXT9-RM

Бренд: B&B Electronics Страницы: 163

Бренд: Oricom Страницы: 30

Бренд: LENCO Страницы: 36

Бренд: Dataradio Страницы: 35

Бренд: Ranger Electronic Страницы: 11

Бренд: Ericsson GE Страницы: 16

Бренд: Galaxy Страницы: 35

Бренд: Hama Страницы: 150

Бренд: Entel Страницы: 2

Бренд: Medion Страницы: 40

X-Tra Talk GXT1000 Series

Бренд: Midland Страницы: 28

Бренд: Kenwood Страницы: 24

UHF P25 Transceiver TK-5810

Бренд: Kenwood Страницы: 44

Бренд: Kenwood Страницы: 71

Бренд: Kenwood Страницы: 76

Бренд: Kenwood Страницы: 41

Бренд: Kenwood Страницы: 124

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды