Swift Controls
Acquisition
Mode
Save
Scan
Export
Inspection Data
Calibration
New /Load
Inspection
A-Scan
Configuration
Scanning
Analysis
Basic Workflow
Technical Support:
email: [email protected]
tel: + 44 (0) 1792 798711
Deploying Scorpion2
Raise the probe holder then
lower the rear wheels onto the
inspection surface.
Lower the front wheels onto
the inspection surface.
Place the probe holder onto
the inspection surface.
Removing Scorpion2
Drive onto the drive off pad
then raise the probe holder
Holding the crawler by the two
handle pull the rear handle
away to lift the rear wheels.
Use the top handle to pull the
crawler away from the
inspection surface.
DO NOT LIFT BY THE PROBE HOLDER OR ENCODERS
Power
Battery
Wi-Fi
Alarm
Drive back
Stop
Drive forward
Joystick control
Status Indicators
Scorpion Control
Enter
Keypad arrows
Back
Software Control
Zoom out
Zoom in
Start / pause scan
Scan Control
Stop scan
