Silverton 43SB, Руководство пользователя

Страница: 124 / 207

SYSTEM OPERATIONS-64
Maintenance of the Trim Tab System is
as follows:
Silverton recommends painting the Trim
Tabs with good quality, antifouling bottom
paint. DO NOT paint any hinges or the
moving parts of the cylinders.
To reduce the risk of electrolysis and
galvanic corrosion, Silverton recommends
the installation of sacri
fi cial zinc anodes on
the Trim Tab plates at least once a year,
preferably during preparation for spring
launch. DO NOT paint the sacri
fi cial zinc
anodes.
Periodically examine the Trim Tabs for
accumulation of underwater growth and
clean as necessary.
Periodically examine the Trim Tab pump
and hydraulic lines, which are located
in the bilge area, for leaks (Refer to the
Mechanical Schematic in the Schematic
Section of this Owner’s Manual for the
location of the Trim Tab pump). Tighten
connections if leaks are noted. If the hy-
draulic lines appear worn or chafed, con-
tact your Silverton Dealer for inspection
and replacement, if necessary.
The photo below shows the Trim Tab
Pump.
Refer to the BENNETT TRIM TAB Manual
included with your Owner’s Packet for
technical information concerning the op-
eration and maintenance of the Trim Tab
System.