Ag7100-Ag6100 Evaluation Board User Manual
5
4.2.3 Ag7100 (Only)
Alternatively if you just require a boost converter; then U2 can be removed. A 12V to
27V dc supply can be connected to J3 – J5 (or J4) and the Ag7100 output can be
extracted from J6 (again centre pin is positive), see Figure 4.
When the board is powered LED2 will be illuminated.
Mains Supply
J3
J5
+
-
12V to 27V (dc)
Power Supply
Mains Supply
J4 (ve)
12V to 27V (dc)
Power Supply
Eval Board with Ag7100 only
J6 (ve)
J6 (ve)
Eval Board with Ag7100 only
57V Output
57V Output
Figure 4: Ag7100 Only Configuration
*Note: Connectors J4 and J6 are DC Power Jacks, that accept a plug with a 5.5mm
outer diameter and 2.5mm inner diameter, see Figure 5.
Figure 5: Plug for J4 & J6
