Water Feeding Method
Cleaning method
13
★ After confirming the amount of
water with measuring rod, pls close
safety valve tightly.
When closing safety valve, if
excessive force is used, safety
valve damage may be caused, So
safety valve closing is subject to no
leakage of vapour.(SR-5800 /2.3ℓ
,SR-5800L/3.5ℓ)
★ Plug into power socket,
switch on power switch and
press iron switch.
After LED indicator of vapour
lights up, the product can be
used.
★ Open safety valve, feed in water about half of
pressure container capacity, shake it, then pour
it out. (repeat 2~3 times)
★ After repeated operation, power on and heat
for about 15 minutes, to eliminate moisture in
pressure container completely.(Safety valve
should be in open state right now)
★ Clean once a month.
★ Service life can be prolonged.
★When disassembling, the agent should be
contacted first to take any measures.
★ Vapour hole on press iron
baseplate may be blocked by
foreign matters, which requires
cleaning by prod often.
------------------------
Thus service life of press iron can
be prolonged.
L
3.5bar
