Echo Point-to-Point optimum settings guide V1.1
4
O
PTIMUM
A
DVANCED
S
ETTINGS
Note: For optimum configuration, most of these settings can be left as they are and as
such will not be listed within the purpose of this guide.
Fix Noise Floor:
This is an anti-interference setting which stops the radio from being overly
sensitive to noise and changing channels when not necessary. Valid input range is -110 to
-70. A good place to start is -95. Adjust according to your needs.
Co-Channel Interference:
This setting reduces sensitivity of equipment within close
proximity. Valid input range is 0-40. When the RF air quality is bad, for example, other radio
equipment is sending packets on the same channel, it will affect the receiving signal of your
APWDS. You can configure a value to ignore this interference.
Note: This value cannot be bigger than the lowest client RSSI. For example, you have 3
clients connected to your APWDS. Their RSSIs are 21, 25 and 30. Your co-channel anti-
interference value cannot be higher than 21, otherwise this client will be disconnected, or
the throughput will be worse than before setting this value.
