Echo Point-to-Point optimum settings guide V1.1
2
O
PTIMUM
R
ADIO
S
ETTINGS
Note: Ensure that before starting your browser is not using any autofill settings as some
fields are recognised and auto filled with irrelevant information. If your ECHO link is
misbehaving or not storing settings, then factory reset the radio back to 192.168.1.2 and
reconfigure from fresh.
Ensure that after every setting change you click “Apply” and then “Save”.
Wireless Mode:
One ECHO device should be set to
Access Point WDS
and the other end (its
partner) to
Station WDS
. This will create a transparent link.
Note:
A device set to Access Point WDS (APWDS) will only connect to a device set to
Station WDS (STWDS) and vice versa. Having both radios set to different operating modes
will cause the radios to not connect.
Region Code:
Set this to your desired country.
IEEE 802.11 Mode:
Set to 802.11an.
Channel Width:
Select the desired channel width.
Channel Shifting:
Disabled by default. You can leave this.
Channel:
Leave as Auto
