Bomi Furniture P/L trading as Silver Lynx ABN 99 006 489 541 11-17 Sages Road Glenroy Victoria 3046 Australia
T:+61 3 9359 4000 F:+61 3 9359 4322 E:[email protected] W:www.silverlynx.com.au
STEP 7
–
Ensure that the bed is sitting square and then tighten all button head bolts using the
allen key. Once snug, tighten only with ¼ turn of the Allen Key. DO NOT USE cordless drivers or
power drills as over-tightening can cause the foot end rail to bow. After this step your bed should
look like the diagram below
STEP 8
–
To set up the slat and spine
system, proceed to the instructions titled “Amendment to
instructions for all Silverlynx beds”.
NOTES
•
Button head bolts should be regularly inspected and may need to be retightened periodically
•
Never drag or move assembled bed as this may damage the bed
CARE & MAINTENANCE
Your Silver Lynx product is crafted with care, properly maintained, it will mature over time
developing a rich deep patina enhancing its appearance. To get the best performance from your
Silver Lynx product, please follow the simple care instructions listed below.
•
Do not use silicone based polishes/cleaners at any time.
•
Dust surfaces gently with a feather duster then wipe gently with a slightly damp cloth/chamois.
•
Do not allow liquids, damp clothes to remain in contact with lacquered surface for extended
periods.
•
Never place furniture in close proximity to heating outlets.
•
Exposure to direct sunlight will cause colour fading to fabrics, leathers and timber finishes.
•
Do not allow solvents, abrasives or heated objects to come in contact with the suite.
•
Do not use cordless drivers or power drills to tighten your bed brackets, as over-tightening can
cause the foot end rail to bow.
Contact your retailer or our sales office for further information
