Bomi Furniture P/L trading as Silver Lynx ABN 99 006 489 541 11-17 Sages Road Glenroy Victoria 3046 Australia
T:+61 3 9359 4000 F:+61 3 9359 4322 E:[email protected] W:www.silverlynx.com.au
STEP 1
–
Place your bed head and side rails approximately where you would like your bed to be
set up, making sure the two button head bolts that are pre-fitted to your side rails are closest to
the foot end of the bed. Connect the side rails to the bed head by hooking the side rail brackets
onto the head brackets.
STEP 2
–
Screw three button head bolts (M4) into the position shown below to connect the side
rails to the bed head and tighten (finger tight only).
STEP 3
–
Complete the above process on the other side rail.
STEP 4
–
Remove the two button head bolts for the Floating Bar from the foot end of each side
rail. Gently lift the side rails and position the Floating Bar, lining up the holes on each end of the
Floating Bar with the holes on the side rails.
STEP 5
–
Using the bolts you removed from the side rails, secure (finger tight only) the Floating
Bar in place
STEP 6
–
Lift the Foot Panel into place, hooking the side rail brackets over the brackets on the
Foot Panel and secure with the remaining button head bolts (finger tight only)
STEP 1-2
STEP 4-5
STEP 6
