GB
10
Problem
Possible cause
Solution
No function when ON/OFF Trigger
Switch (9) is operated
No power
Check power supply
Defective ON/OFF Trigger Switch
Have the ON/OFF Trigger Switch replaced by an authorised Silverline service
centre
Carbon brushes worn
Have the carbon brushes replaced by an authorised Silverline service centre
Slow cutting performance
Saw Blade (1) not suitable for the material being cut
Fit compatible saw Blade
Saw Blade blunt
Fit new saw Blade
Incorrect cutting speed
Adjust cutting speed to match material requirements
Saw Blade (1) blunts quickly
Saw Blade not suitable for the material being cut
Fit compatible saw Blade
Too much pressure exerted on to the tool
Use less pressure whilst moving the tool
Cutting speed too fast
Reduce cutting speeds to material requirements
No cutting fluid/cooling agent used when cutting metal
Use a suitable cutting fluid when cutting metal
Troubleshooting
937675_Manual.indd 10
08/01/2018 11:51
